Kitchen & Bathroom Remodeling in Pembroke Pines FL
Henry Remodeling delivers kitchen and bathroom remodeling throughout Pembroke Pines. Bathroom installations begin at $8,500; kitchens from $50,000. Permit-required scopes are managed through the City of Pembroke Pines Building Division by our licensed General Contractor partners.
Get Instant Quote
Remodeling Costs in Pembroke Pines
Bathroom Remodeling
$8,500–$29,000
- Guest bath refresh: $8,500–$14,500
- Master bath gut renovation: $22,000–$29,000
- Tub-to-shower conversion: included in range
- Waterproofing standard; permit-required scopes handled by licensed GC partners
Kitchen Remodeling
$12,500–$50,000
- Cabinet & countertop replacement: from $50,000
- Full kitchen gut renovation: up to $50,000
- Countertop-only replacement: from $3,200
- Structural and plumbing scopes coordinated through licensed GC partners
Remodeling in Pembroke Pines: What You Need to Know
Pembroke Pines has grown from a western Broward County bedroom community into one of the largest cities in South Florida. Silver Lakes and similar master-planned neighborhoods carry strict community guidelines; Pembroke Lakes’s older stock has aging drywall, original cabinetry, and outdated tile from the mid-1980s. The city draws primarily family buyers focused on interior quality upgrades as they move up or settle in.
The City of Pembroke Pines Building Division runs an efficient operation by Broward County standards. Community associations in many subdivisions require scope documentation and finish-board submittals before city permits can proceed. Rain and humidity are consistent drivers of grout failure and moisture infiltration throughout the city’s older bathrooms. Henry Remodeling provides specialized, hands-on installation services working under the umbrella of state-licensed General Contractors. Our licensed GC partners manage all permits and trade scopes; our craftsmen execute tile, cabinetry, and surface work.
Why Homeowners Choose Henry Remodeling
- Our Installation Approach: Henry Remodeling provides specialized, hands-on installation services working under the umbrella of state-licensed General Contractors. Our craftsmen handle tile, cabinetry, and surface work; our licensed GC partners manage permits and all licensed trade scopes.
- Permits Through Licensed GC Partners: Every permit-required scope is pulled by our licensed GC partners through the City of Pembroke Pines Building Division. We do not perform unpermitted work under any circumstances.
- Written Estimates, Line by Line: Every quote itemizes scope, materials, and labor separately. No verbal estimates, no range guesses over the phone.
- Local Experience: We have completed projects across Pembroke Pines’s neighborhoods and understand the community approval processes, local inspector expectations, and substrate conditions specific to this market.
Recent Projects in Pembroke Pines
Master Bath Renovation — Silver Lakes (33029)
After Silver Lakes community association approved the scope and finish boards, our GC partner filed with the City of Pembroke Pines Building Division. We replaced the original 1994 tile and builder vanity with 24×24 rectified porcelain, a barrier-free walk-in shower with Schluter Kerdi waterproofing, frameless glass, floating double vanity with quartz top, and Moen spot-resist brushed nickel fixtures. 15-day project.
Full Kitchen Remodel — Pembroke Lakes (33026)
This 1987 Pembroke Lakes home had original raised-panel oak cabinets and laminate countertops. Our GC partner filed with the City of Pembroke Pines Building Division. We removed all cabinets and countertops, installed full-overlay Shaker cabinetry with soft-close hardware, fabricated and set Silestone Calacatta perimeter and island countertops, and installed a subway tile backsplash. Appliances were client-supplied. 20-day project.
Tub-to-Shower Conversion — West Pines (33028)
Humidity had cracked grout throughout the original tub surround tile in this West Pines home, allowing water to saturate the cement board behind. We removed all substrate to the stud, applied full RedGard waterproofing, and installed 12×24 gray porcelain in a running-bond pattern, a linear drain, built-in bench, and frameless glass. Our GC partner handled the drain relocation through a licensed plumber and filed with the City of Pembroke Pines Building Division. 12-day project.
All projects requiring permits are coordinated through the City of Pembroke Pines Building Division by our licensed General Contractor partners. Henry Remodeling provides specialized installation services under this GC umbrella.
Our Process
- Free On-Site Estimate
We visit the project space, measure every surface, and produce a written line-item estimate at no charge and with no obligation. - Permit Coordination
Our licensed GC partners file permit applications with the City of Pembroke Pines Building Division before a tool touches the space. We include any community association documentation required before the city will accept the application. - Demolition
Existing tile, cabinetry, fixtures, and failed substrates are removed carefully and hauled off-site. Substrate and drain condition are confirmed before installation scope is finalized. - Installation
Tile, cabinetry, countertops, and fixtures are installed in sequence by Henry Remodeling’s installation specialists. All licensed trade work is executed through our GC partners. - Final Walkthrough
We walk every finished surface with you before the project is closed. Anything that does not meet the written scope is addressed before we leave.
Common Issues We Fix in Pembroke Pines Homes
Community association approval requirements in Silver Lakes and similar
Many Pembroke Pines master-planned communities require association review of scope and finish materials before permits are filed with the City of Pembroke Pines Building Division. Our GC partners prepare the full documentation package to satisfy these requirements in a single submission round.
Humidity-driven grout failure in 1980s–1990s bath tile
Pembroke Lakes and other 1980s Pembroke Pines neighborhoods frequently have original bath tile installed over felt paper without any membrane waterproofing. Year-round rain and humidity deteriorate grout joints and allow moisture to penetrate behind the tile. We apply full Schluter Kerdi or RedGard membrane on every wet surface as a baseline standard.
Particleboard cabinet box failure in older kitchens
Original cabinet boxes in Pembroke Pines homes from the late 1980s were built with particleboard that has been degraded by chronic humidity. Replacement with plywood-box construction is the only durable long-term solution. We specify plywood boxes as standard on all new cabinetry.
Sandy soil settlement producing diagonal floor tile cracks
Sandy substrate in western Broward County shifts during extended rain events, which telegraphs into slab-on-grade floors as diagonal tile crack patterns. Schluter Ditra uncoupling membrane is installed under every new floor tile application to break the connection between tile and moving substrate.
Start with a Free Site Visit
We visit every Pembroke Pines project before writing a single number. We check drain line condition, substrate integrity, and moisture behind existing tile — things no phone call can reveal. Your written estimate reflects actual site conditions, not assumptions from a photo.
Materials & Standards
Tile
Rectified porcelain in 12×24 to 24×48 formats, large-format natural stone, classic subway, and decorative mosaic accents. Clients make selections at local slab yards — not from a catalog or a PDF.
Waterproofing
Schluter Kerdi sheet membrane or RedGard liquid-applied membrane on all shower walls, floors, and curbs. In Pembroke Pines’s climate, felt paper and plastic sheeting are not substitutes we use on any project.
Cabinetry
Semi-custom Shaker, flat-panel slab, and inset door profiles with plywood-box construction, soft-close hinges, and full-extension drawer boxes standard across every tier. Custom lead time runs 4–6 weeks from drawing approval.
Countertops
Quartz from Silestone, Cambria, and MSI; natural quartzite and marble for premium applications. Henry Remodeling templates, fabricates, and installs in-house — no third-party handoffs that introduce schedule risk.
Permits & Licensing
All permit-required work on Pembroke Pines projects is coordinated through the City of Pembroke Pines Building Division by our licensed General Contractor partners. Henry Remodeling provides specialized, hands-on installation services working under the umbrella of these state-licensed GC partners.
Our craftsmen execute tile, cabinetry, and surface installations. Our GC partners pull all required permits and oversee the structural, plumbing, and electrical scopes. Unpermitted work is never an option.
FAQ: Remodeling in Pembroke Pines
A straightforward bathroom remodel in Pembroke Pines typically takes 9–14 days once materials are staged on-site. A master bath gut renovation with custom tile, frameless glass, and a floating vanity generally runs 14–18 days. A day-by-day project schedule is provided before demolition begins.
Yes, for any scope involving plumbing or electrical changes. Permit applications for Pembroke Pines remodeling projects are filed with the City of Pembroke Pines Building Division by our licensed GC partners. Standard turnaround is typically within a week for straightforward scopes. We do not begin work before a permit is in hand.
Many Pembroke Pines communities require association sign-off before a permit application can be filed. Our GC partners prepare the full documentation package — scope descriptions, finish material boards, and permit copies — so the review process moves efficiently through all required channels.
Scope and finish level. A $8,500 remodel in Pembroke Pines typically covers tile replacement on an existing layout, a new vanity, toilet swap, and basic fixture updates. A $29,000 remodel involves full waterproofing, a custom-tiled walk-in shower with frameless glass, a floating double vanity with quartz top, and a complete plumbing rough-in handled by a licensed plumber under our GC partner.
Yes. Most Pembroke Pines kitchen remodels replace cabinets, countertops, and appliances within the existing footprint without structural changes. When wall removal is desired, our GC partners coordinate the structural header and required permit through the City of Pembroke Pines Building Division before demo begins.
All plumbing and electrical work is performed by licensed trade contractors working under our state-licensed GC partners, who pull the required permits through the City of Pembroke Pines Building Division. Henry Remodeling installation specialists focus exclusively on tile, cabinetry, countertop, and surface installation.
Failed shower pan liners and moisture-saturated cement board behind original tub surrounds. We sound every floor and probe all substrates before finalizing scope so Pembroke Pines homeowners face no mid-project surprises. Any discovered conditions are documented and reviewed before any cost adjustment is discussed.
Henry Remodeling works with third-party lenders offering financing options for Pembroke Pines projects. Ask about current terms and pre-qualification when you schedule your on-site estimate.
Henry Remodeling Serves Pembroke Pines and Nearby
Also serving: Fort Lauderdale · Coral Springs · Pompano Beach · Deerfield Beach · Boca Raton